1.Pre-operation Preparation
Before using an industrial meat grinder, run the machine idle for 1 minute to check whether it runs smoothly without abnormal noise, and ensure all parts are clean and intact.
Precautions for Grinding Operation
Although meat grinding seems simple, it requires considerable physical effort. It is recommended that two people work together, or a single male operator perform the task.Before grinding, thoroughly clean raw materials such as meat to be ground, then cut them into strips as needed, or directly place small boneless, skinless pieces into the feeding tray. Use the feeding plunger to gradually push materials into the grinding chamber. Never use hands to push ingredients into the machine directly, to avoid fingers being accidentally caught.
2.Cleaning After Use
After each use, thoroughly clean the machine with clean water and dry it for next operation.
Alternatively, you may grind some vegetables such as green onions or potatoes. This is not only a clever cleaning method but also effectively reduces the waste of meat residues.
Prepare cleaning tools such as a toothbrush. Disassemble the grinder in reverse order first, then soak the parts in warm water with dish soap. Use a toothbrush or similar tools to carefully clean each component, ensuring all meat residues and chunks are completely removed. Finally, rinse twice with tap water to eliminate dish soap residue.
Pay special attention to cleaning the screw and sleeve of the industrial meat grinder with a soft brush for thorough cleaning. Meanwhile, carefully clean other parts of the grinder, including those not in direct contact with food.
When cleaning the main body of the machine, it is recommended to use a damp cloth or soft brush, then rinse with clean water. After cleaning, place the grinder in a cool and ventilated area to air-dry naturally for future use.Clean the grinder at least once or multiple times daily to remove dust and residues inside and outside the machine.
Important Notes
Before each use of the industrial meat grinder, be sure to rinse it briefly.Always turn off the power and unplug the machine before cleaning.
